What Are The Types of Stone Crushing Machines

Various types of stone crushing machines are available in the market. Each type has its advantages and disadvantages. The choice of the right type is dependent on the nature of the material. These factors include the hardness of the material, the shape of the material, and the rate of feeding. It is also important to consider the size of the finished product. A stone crushing machine can be divided into jaw, cone, and impact crushers. The jaw type of a stone crushing machine is the most common one. In this type of crusher, the stone is crushed to a specific size and then guided to the next stage of the process.
In the jaw type of a stone crushing machine, the stone is first guided to a feeder that feeds the stone into the crushing chamber. The feeder provides a larger amount of material to the crushing chamber than the single-jaw crusher. The feeder is powered by a belt on a pulley C. The material is then guided to the discharge chute. In the discharging unit of a crusher, the high pressure of air is reduced. The size of the broken fragments depends on the distance between the jaws. The multiplicity of the jaws acts as a safety provision. This type of stone crushing machine is used to make products ranging from gravel to sand.
In the semi-fixed stone crushing machine, the machine is fixed on a steel structure or on a concrete foundation. This type of stone crushing machine is generally installed on a working slope. It minimizes the frequency of movement and improves the service life. This type of machine is suited for small and medium-sized production. It is usually transported by a crawler or tire-type track.
The Cone Crusher is a highly efficient machine. It can produce up to ten tons of quartz per hour. It offers the highest crushing efficiency and end product quality. This machine is made of quality steel casting and operates on a high-speed rotor. It is suitable for concrete, railway, water conservancy, and sand making industries. Its cost per ton of production is very low. It can also work efficiently in the secondary crusher.

DCS DCH single cylinder hydraulic cone crusher

The medium and fine crushing of various cavity shapes can be realized only by replacing the fixed cone. Program-controlled hydraulic and lubricating systems ensure overload protection and good bearing lubrication.
The shape is very simple and compact. Through the design structure of the single cylinder at the bottom, the three important functions of direct adjustment of the discharge port, prevention of iron passing, and cavity cleaning are completed. Therefore, the single-cylinder hydraulic cone crusher does not have an external discharge port adjustment mechanism, nor an external hydraulic cylinder or spring anti-iron device, and the overall shape and structure are simple and compact.